Description Of The Ap-8000 Unit; Prerequisites - Proxim ORiNOCO AP-8000 User Manual

Installation and Initialization

Prerequisites

Description of the AP-8000 Unit

Figure 2-3 Schematic Illustration of the Unit
Prerequisites
Before installing your unit, you need to gather certain information. The following table identifies the information you need:
AP's IP Address
Web Interface/Telnet/CLI User
Name/Password
SNMP Read Password
SNMP Read-Write Password
Security Settings
Gateway IP Address and Subnet
Mask
If you do not have a DHCP server on your network, then you need to assign the
Access Point an IP address that is valid on your network.
Each Access Point requires a read/write username and password to access the
web interface, Telnet and CLI. The default username is "admin" and password is
"public".
Each Access Point requires a password to allow get requests from an SNMP
manager. The default username is "admin" and password is "public".
Each Access Point requires a password to allow get and set requests from an
SNMP manager. The default password is "public".
You need to determine what security features you will enable on the Access
Point.
The gateway IP address and subnet mask of the network environment where the
Access Point is deployed.
AP-8000 User Guide
12