Sntp - Proxim ORiNOCO AP-8000 User Manual

Using Web Interface to Manage the Access Point
Monitoring the Device
2. Select the Log Priority from the drop-down box and click on Show Event Log button.
NOTE: Select Clear Event Log, if you want to clear the event log table.
Figure 6-57 Event Log Details

SNTP

You can configure and view the following parameters within the SNTP page:
• Enable SNTP Status: Check the Enable SNTP status check-box. The selected status will determine which of the
parameters on the SNTP page are configurable.
• Primary Server IP Address/Domain Name: If SNTP is enabled, enter the host name or IP address of the primary
SNTP server.
• Secondary Server IP Address/Domain Name: If SNTP is enabled, enter the host name or IP address of the
secondary SNTP server.
• Time Zone: Select the appropriate time zone from the drop-down box.
• Day Light Saving Time: When SNTP is disabled, the following time-relevant objects are manually configurable.
When SNTP is enables, these objects are grayed out.
Click Ok.
AP-8000 User Guide
94