Password Management - Proxim ORiNOCO AP-8000 User Manual

Using Web Interface to Manage the Access Point
Managing the Device
Figure 6-47 Retrieve From Device Using TFTP
• Server IP Address: Enter the TFTP server IP Address.
– Double-click the TFTP server icon on your desktop and locate the IP address assigned to the TFTP server.
• File Name: Enter the name of the file to be uploaded.
• File Type: Select the type of the file to be uploaded: Config file or Event Log.
Click Retrieve to initiate the procedure.

Password Management

Use the Services link to configure passwords and other service parameters. You can configure the following parameters
and click REBOOT to update the changes:
• HTTP/HTTPS: The password for the Web browser HTTP interface. Enter a password in the Password field and enter
the Port number. The default password is "public".
• Telnet/SSH: The password for the CLI interface (via serial or Telnet). Enter a password between 6 and 32 characters
in the Password field. The default password is "public".
• SNMP: The password for Read/Write access to the AP using SNMP interface. Enter a password between 6 and 32
characters in the Password field. The default password is "public".
NOTE: This password "public" is SNMP Read/Write Community string and is also applicable to SNMP Read
Community.
• Trap Host IP Address: Enter the IP Address for which the traps needs to be delivered. By default, an IP Address will
be available, that you can change.
NOTE: For security purposes Proxim recommends changing ALL PASSWORDS from the default "public" immediately, to
restrict access to your network devices to authorized personnel.
• Reset To Factory: Click on the Reset To Factory button to reset the unit to the factory settings.
CAUTION: Resetting the AP to its factory default configuration will permanently overwrite all changes that have made
to the unit. The AP will reboot automatically after this selection has been issued.
AP-8000 User Guide
87