Using Web Interface to Manage the Access Point
Managing the Device
•
If the operation is not completed successfully the following screen appears, and the reason for the failure is
displayed.
Figure 6-40 Update Device Using HTTP- Failure Message
Using TFTP
Use the TFTP Download page to download config, image file to the device. A TFTP server must be running and
configured to pint to the directory containing the file.
If you do not have a TFTP server installed on your system, install the TFTP server from the installation CD. You can
either install the TFTP server from the CD Wizard or run OEM-TFTP-Server.exe found in the CD's Xtras/SolarWinds
sub-directory.
Using the TFTP Download page to enter the following information as described below:
Figure 6-41 Update Device Using TFTP Server
•
Server IP Address: Enter the TFTP server IP Address.
–
Double-click the TFTP server icon on your desktop and locate the IP address assigned to the TFTP server.
NOTE: This is the IP address that will be used to point the Access Point to the AP Image file.
•
File Name: Enter the name of the file to be downloaded (including the file extension).
–
Copy the file to the TFTP server's root folder.
•
File Type: Select the proper file type. Choices include:
–
Config: Configuration information, such as System name, contact name, and so on.
–
Image: AP image (executable program)
•
Operation: Select either Download or Download & Reboot. You should reboot the AP after downloading files.
NOTE: If you select None as Operation, then no operation will be performed.
Click OK to initiate the process.
•
If the operation is completed successfully the device would provide the information about the successful update.
AP-8000 User Guide
84