Management Access Control - Proxim ORiNOCO AP-8000 User Manual

Using Web Interface to Manage the Access Point
Managing the Device
Figure 6-48 Management Services Page

Management Access Control

The Management Access Control provides option to control the interfaces as well as users who can access the device.
The users are controlled using the IP address, i.e., the traffic is allowed to the device from the IP addresses configured in
the access table.
If the Management Access Control is unchecked, the access control is not applied. You need to reboot the unit to update
the changes that you have made.
Navigate Management > Access Control. This displays the Access Control Table page.
Figure 6-49 Management Access Control Page
1. Place a check mark in the Management Access Control check-box. This will enable the Management Access
Control.
NOTE: You can disable this feature by unchecking the Management Access Control.
AP-8000 User Guide
88