Upgrading The Firmware - Proxim ORiNOCO AP-8000 User Manual

Using Web Interface to Manage the Access Point
Managing the Device
Figure 6-37 System Inventory Management Page

Upgrading the Firmware

Update Device
Using HTTP
Use the HTTP Download page to download config, image files to the device. In the HTTP Download page, perform the
following procedure to download the specific file:
Figure 6-38 Update Device using the HTTP Download Page
1. Select the File Type that needs to be updated from the drop-down box. Choices include:
– Image for the AP Image (executable program).
– Config for configuration, such as System Name, Contact Name and so on.
2. Use the Browse button or manually type in the name of the file to be downloaded (including the file extension in the
File Name field. If typing the file name, you must include the full path and the file extension in the file name text box.
3. To initiate the HTTP Update operation, click Update button.
NOTE: An HTTP file transfer using SSL may take extra time.
• If the operation is completed successfully the device would provide the information about the successful update.
Figure 6-39 Update Device Using HTTP- Success Message
AP-8000 User Guide
83