Proxim ORiNOCO AP-8000 User Manual page 41

Access Point Features
Configuring the Device
This Attribute allows the NAS to send in the Access-Request packet the phone number that the call came from, using
Automatic Number Identification (ANI) or similar technology. It is only used in Access-Request packets.
• Acct-Interim-Interval
Obtained during the Authentication process and used for determining the time interval for sending Accounting Update
messages.
NOTE: If this attribute is not obtained from the Radius Server, the AP uses default value of 300 seconds for updating
the accounting messages.
Accounting Attributes
• Acct-Status-Type
This attribute indicates whether this Accounting-Request marks the beginning of the user service (Start) or the end
(Stop).
• Acct-Input-Octets
This attribute indicates how many octets have been received from the port over the course of this service being provided,
and can only be present in Accounting-Request records where the Acct-Status-Type is set to Stop.
• Acct-Output-Octets
This attribute indicates how many octets have been sent to the port in the course of delivering this service, and can only
be present in Accounting-Request records where the Acct-Status-Type is set to Stop.
• Acct-Session-Id
This attribute is a unique Accounting ID to make it easy to match start and stop records in a log file. The start and stop
records for a given session will have the same Acct-Session-Id.
• Acct-Authentic
This attribute is included in an Accounting-Request to indicate how the user was authenticated, whether by RADIUS, the
NAS itself, or another remote authentication protocol.
• Acct-Session-Time
This attribute indicates how many seconds the user has received service for, and can only be present in
Accounting-Request records where the Acct-Status-Type is set to Stop.
• Acct-Input-Packets
This attribute indicates how many packets have been received from the port over the course of this service being
provided to a Framed User, and can only be present in Accounting-Request records where the Acct-Status-Type is set to
Stop.
• Acct-Output-Packets
This attribute indicates how many packets have been sent to the port in the course of delivering this service to a Framed
User, and can only be present in Accounting-Request records where the Acct-Status-Type is set to Stop
• Acct-Terminate-Cause
This attribute indicates how the session was terminated, and can only be present in Accounting- Request records where
the Acct-Status-Type is set to Stop.
RADIUS Features
The parameters that can be configured:
• Profile Name: This parameter provides the RADIUS profile name. Profile name is o identify a set of four RADIUS
servers configured one each per Accounting, Authentication, Secondary Accounting and Secondary Authentication.
AP-8000 User Guide
41