Proxim ORiNOCO AP-8000 User Manual page 129

Dual radio wireless access point
Hide thumbs Also See for ORiNOCO AP-8000:
Table of Contents

Advertisement

Using CLI to Manage the Access Point
Configuring the Device Using CLI Commands
protocol-number: 08:88
filter-status: block
row-status: notInService
}
index 19 {
protocol-name: EAPOL ether type
protocol-number: 88:8e
filter-status: block
row-status: notInService
}
Static MAC Table Configuration
The Static MAC Address filter optimizes the performance of a wireless (and wired) network. When this feature is properly
configured, the AP can block traffic between wired devices and wireless devices based on MAC address. Perform the
following commands to configure Static MAC .
(config)# dev-configure
(config-dev<config>)# filtering
(config-dev<config>-filter)# static-table
(config-dev<config>-filter-static<mac>)# index 1 ?
Possible completions:
<[Enter]> Execute this command
filter-comment
row-status
wired-mac-address
wired-mac-mask
wireless-mac-address
wireless-mac-mask
(config-dev<config>-filter-static<mac>)# index 0 row-status 4
(config-dev<config>-filter-static<mac>)# index 0 wired-mac-address 00:a6:33:44:23:34
(config-dev<config>-filter-static<mac>)# index 0 wired-mac-mask FF:FF:FF:FF:FF:FF
(config-dev<config>-filter-static<mac>)# index 0 wireless-mac-address 00:c3:d3:23:44:23
(config-dev<config>-filter-static<mac>)# index 0 wireless-mac-mask FF:FF:FF:FF:FF:FF
(config-dev<config>-filter-static<mac>)# index 0 filter-comment test
(config-dev<config>-filter-static<mac>)# index 0 row-status 4
#show
Device-Name# show configure filtering static-mac-addr-filter
// RUNNING-CONFIGURATION //
// Static MAC Address Filter Table //
index 1 {
wired-mac-address 00:a6:33:44:23:34
wired-mac-mask FF:FF:FF:FF:FF:FF
wireless-mac-address 00:c3:d3:23:44:23
wireless-mac-mask:FF:FF:FF:FF:FF:FF
filter-comment:test
row-status:active
}
TCP/UDP Port Filter Configuration
Port-based filtering enables you to control wireless user access to network services by selectively blocking TCP/UDP
protocols through the AP. Perform the following commands to configure TCP/UDP Filter
(config)# dev-configure
(config-dev<config>)# filtering
Static Mac Address Comment
Filter Table Row Status
Wired Mac Address Filter
Wired Mac Mask
Wireless Mac Address
Wireless Mac Mask
AP-8000 User Guide
129

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents