Proxim ORiNOCO AP-8000 User Manual page 60

Using Web Interface to Manage the Access Point
Configuring the Device
• Enable the status of Closed Systems to broadcast the beacons.
• Enter the Fragmentation Threshold. The Fragmentation Threshold value range is between 256 to 2346. By
default the Fragmentation Threshold is 2346, when the Fragmentation Threshold is disabled.
NOTE: If you configure the Fragmentation Threshold value between the said range, then only the fragmentation
of the packets takes place.
• Enter the Security Profile Name.
• Enter Radius Profile Name.
• Enter the VAP VLAN ID.
NOTE: The valid range for VLAN ID is between 1 to 4094. If you select a value as -1, then this will disable the
VLAN Tagging.
• Enter the VAP VLAN Priority. (You can enter the priority value between 0-7).
• Enter the QoS Profile Name. Ensure that you select the name that you used for creating the QoS Profile. See
QoS Profile.
NOTE: If the QoS Profile Name is defined as NONE, then the QoS feature will be disabled by default.
• Select the Local MAC Authentication status.
NOTE: If you have enabled this field, then do not enable the Radius MAC Authentication field.
• Select the Radius MAC Authentication status.
• Select the Radius Accounting status.
• Enable the Entry Status for the radio. If you disable the radio, then you cannot configure the Wireless VAP for the
disabled radio.
5. Click OK.
NOTE: Follow the above mentioned steps if you want to configure VAP for Interface 2.
Properties
Using this page, you can configure the properties of wireless interface.
1. Navigate to Configuration > Wireless > Interface 1 > Properties. The Wireless Interface - 1 Properties page will
display.
2. Configure the following parameters:
AP-8000 User Guide
60