Proxim ORiNOCO AP-8000 User Manual page 112

Using CLI to Manage the Access Point
Configuring the Device Using CLI Commands
(config-dev<config>-if-wireless)#properties-tbl
(config-dev<config>-if-wireless-properties<tbl>)# radio 2 auto-channel-selection enable
(config-dev<config>-if-wireless-properties<tbl>)#radio 2 auto-rate-selection enable
(config-dev<config>-if-wireless-properties<tbl>)#radio 2 cellsize large
(config-dev<config>-if-wireless-properties<tbl>)#radio 2 current- channel-bandwidth 40
changes in current channel bandwidth reboot requires....
(config-dev<config>-if-wireless-properties<tbl>)# radio 2 current-operating-channel 5
(config-dev<config>-if-wireless-properties<tbl>)# radio 2 dtim 1
(config-dev<config>-if-wireless-properties<tbl>)# radio 2 operational-mode DOT11NG
changes in operational mode reboot requires....
(config-dev<config>-if-wireless-properties<tbl>)# radio 2 radio-status enable
(config-dev<config>-if-wireless-properties<tbl>)#radio 2 tpc 1
(config-dev<config>-if-wireless-properties<tbl>)# radio 2 transmit-rate 0
(config-dev<config>-if-wireless-properties<tbl>)# radio 2 vap-beacon-interval 100
(config-dev<config>-if-wireless-properties<tbl>)# radio 2 vap-rts-threshold 2346
Show command for the properties table Configuration
Device-Name# show configure interface wireless properties-table
// RUNNING-CONFIGURATION //
// Wireless Properties Table //
radio 1 {
radio-status: enable
operational-mode: DOT11NA
supported-operational-mode: DOT11NG,DOT11NA
current-channel-bandwidth: 40
supported-channel-bandwidth: 20,40
auto-channel-selection: disable
current-operating-channel: 157
supportedchannel: 36,44,52,60,100,108,116,124,132,149,157
auto-rate-selection: enable
transmit-rate: 0
supported-rate: 6,9,12,18,24,36,48,54
vap-rts-threshold: 2346
vap-beacon-interval: 100
transmit-power-control: 6
cellsize: small
dtim: 3
}
radio 2 {
radio-status: enable
operational-mode: DOT11NG
supported-operational-mode: DOT11G,DOT11NG,DOT11A,DOT11NA
current-channel-bandwidth: 20
supported-channel-bandwidth: 20,40
auto-channel-selection: disable
current-operating-channel: 3
supportedchannel: 1,2,3,4,5,6,7,8,9,10,11
auto-rate-selection: enable
transmit-rate: 0
supported-rate: 1,2,5,6,9,11,12,18,24,36,48,54
vap-rts-threshold: 2346
vap-beacon-interval: 100
transmit-power-control: 9
cellsize: small
dtim: 3
}
AP-8000 User Guide
112