Using CLI to Manage the Access Point
Managing the Device Using CLI Commands
TFTP Configuration
You can transfer file to or from AP using TFTP. A TFTP server must be running and configured to point to the directory
containing the file.
#configure
(config)#dev-management
(configure-mgmt)#tftp
(config-mgmt-tftp)#?
server-ip
filename
filetype
fileoperation
operation-status
(config-mgmt-tftp)#server-ip 10.0.0.1
(config-mgmt-tftp)#file-name apimage.sei
(config-mgmt-tftp)#file-type image
(config-mgmt-tftp)#operation-type none
(config-mgmt-tftp)#exit
(config-mgmt)#exit
(config)#exit
Device-Name# show management tftp
// RUNNING-CONFIGURATION //
// TFTP Configuration //
tftp {
server-ip: 169.254.128.133
file-name: image.bin
file-type: image
operation-type: none
operational-status: idle
}
Telnet configuration
You can change the Telnet password using the following command.
(config)#dev-management
(configure-mgmt)#telnet
(config-mgmt-telnet)# password public
Device-Name# show management telnet
// RUNNING-CONFIGURATION //
// Telnet Configuration //
telnet {
password: ******
}
HTTP Configuration
You can change the HTTP password using the following command.
(config)#dev-management
(configure-mgmt)#http
TFTP Server IP Address
TFTP File Name
TFTP Type
TFTP File Operation
TFTP Operation Status
AP-8000 User Guide
133