Proxim ORiNOCO AP-8000 User Manual page 70

Using Web Interface to Manage the Access Point
Configuring the Device
Figure 6-20 802.1D To IP DSCP Mapping Table Page
802.1D to 802.1p Map Tbl
Use this page to configure QoS 802.1D to 802.1p priority mapping (for layer 2 policies).
1. Navigate to Configuration > QoS > Dot1D to Dot1p Map Tbl
2. In the Dot1D to Dot1p Mapping Table page, enter the 802.1p Priority (from 0-7) for 802.1d Priorities 0-7.
3. Click OK.
Figure 6-21 802.1D to 802.1p Mapping Table Page
QoS Profile
Perform the following procedure to configure QoS Profile.
AP-8000 User Guide
70