Table of Contents
Advertisement
Océ | Media System
Mandrel Assembly
3.2.4
The supply and take-up mandrel assemblies include two hubs. They must be adjusted
according to the hole placement along the mandrel to center the supply and take-up cores.
Indexing holes are provided, and the user should ensure that the set screws are properly
seated in the mandrel index holes.
The Arizona 500 printer accepts media from 36 inches to 75 inches wide. Specifically, the
printer can handle 75, 72, 70, 68, 66, 64, 62, 60, 54, 50, 48, 40 and 36-inch wide rolls of
supply media. When the media is 48 inches and greater, the use of the media stiffener
(installed at the 40-inch hole location) on the supply and take-up are required to support
the center of the core due to media weight (see Figure 3-4).
Figure 3-4 Mandrel Assembly
3-4
Advertisement
Table of Contents
