Table of Contents
Advertisement
Océ | Control Panel
If no error occurs, you then see:
Stabilizing media
please wait
When stabilizing is complete, printer status information is displayed.
11.
Press ACCEPT. You then see:
OPERATOR
media menu
Ink
0.4.6
The Ink menu is used to install new ink bottles. You are required to either scan or manually
enter the barcode code found on the side of the ink bottle for each new installation.
Ink Bottle Installation
Follow these steps to view the Ink menu:
1.
Navigate to:
MAIN MENU
operator
2.
Press the ACCEPT button. You then see:
OPERATOR
print parameters
3.
Press the MENU button five times. You then see:
OPERATOR
ink menu
4.
Press ACCEPT. You then see:
INK LOW LEVEL
Ink low warning when: xx% remaining
The default value is 35%.
When the ink level decreases to the warning level, such as 35%, of the bottle
volume, Ink Low warning indicators appear on the operator control panel. The
minimum recommended setting is 10%.
For additional information, see "Firmware 2.2 Notes" on page C-12.
5.
Press ACCEPT. You then see:
INSTALL INK BOTTLE
color: [color]
Use the +/- buttons to select a color to install.
4-26
Advertisement
Table of Contents
