Table of Contents
Advertisement
Important: To prolong the life of the waste bottle gasket, the ink should always be
wiped off the following areas after emptying the waste bottle and before
reinstalling it:
•
•
•
Ink Supply Changes
2.2
To reduce the chance of poor image quality, do not shake the ink supply bottles before
installation or during printing. Shaking does not improve ink consistency, but may
introduce unwanted air bubbles into the ink system. Follow these steps to correctly replace
the ink supply bottles:
1.
Follow the control panel message and/or go to the Ink Menu to select the color ink
to install or replace.
7/26/04
Both sides of the gasket
Inside the cap
Top of the waste bottle inside and out
Figure 2-4 Waste Bottle Cap and Gasket
Ink Supply Changes
2-3
Advertisement
Table of Contents
