Park Carriage - Oce Arizona 500 User Manual

Park Carriage

The Park Carriage menu enables the operator to move the carriage back to the home
position or over the capping station. Follow these steps to park the carriage:
1. Navigate to:
MAINTENANCE
access carriage
2. Press the MENU button. You then see:
MAINTENANCE
park carriage
3. Press the ACCEPT button. You then see:
PARK CARRIAGE
'ACCEPT' to start
4. Press ACCEPT. You then see:
Parking Carriage
please wait
The carriage moves to the home position over the capping station.
High Purge Nozzles
Warning:
Media must be installed prior to performing this function.
The carriage is moved to the capping station directly above the drain holes. The purge
pressure is elevated. This process may take as long as 30 seconds. The purge is then
performed. If multiple purges are requested, a pause occurs between purges to allow the ink
to refill. A blot at the maintenance station is performed after the purge to clean the nozzle
plate. If the printer is idle, a nozzle print follows the blot. Follow these steps to perform a
high purge:
1. Navigate to:
MAINTENANCE
park carriage
2. Press the MENU button. You then see:
MAINTENANCE
high purge nozzles
7/26/04
Operator
4-15