Table of Contents
Advertisement
11.
Install the new blotting cloth roll on the lower hub, and capture the left end with the
lever arm. Install the empty notched take-up core on the upper hub with drive pins,
and capture the left end with the lever arm (see Figure 5-11).
Figure 5-11 Drive Hubs
12.
Feed the leading edge of the cloth from the backside of the roll up and around the
Teflon sheet and foam pad (see Figure 5-12).
Figure 5-12 Feeding the Cloth (Step 1)
7/26/04
Maintenance Cloth Station
5-13
Advertisement
Table of Contents
