Table of Contents
Advertisement
Océ | Printer Maintenance
13.
Continue pulling the leading edge of the cloth across the Teflon sheet until it reaches
the take-up core (see Figure 5-13). Remove the paper backing off the leading edge of
the cloth so it can be taped evenly to the empty take-up core.
Figure 5-13 Feeding the Cloth (Step 2)
14.
Attach the cloth onto the empty core (see Figure 5-14).
Figure 5-14 Attach the Cloth to the Take-up Core
15.
Rotate the supply roll to take out the slack in the cloth path. If you lowered the
maintenance station, carefully lift the station and insert the release pins back into the
locking holes to secure it. Ensure that both pins (handles) are fully seated in their
respective holes.
5-14
Advertisement
Table of Contents
