Cleaning The Cleaning Wiper - Oce CS9360 User Manual

Step 4: Press [Cleaning] for at least two seconds.
Start Head cleaning.

"Cleaning **%" is displayed.

After Head cleaning is complete, the operation panel shifts to Normal.

NOTE
If blurs or lacking parts in printed media do not disappear with one time of Head cleaning,

perform Strong cleaning.
If blurs or lacking parts in printed media do not disappear with several times of Head

cleaning, refer to "7 Troubleshooting", and take appropriate measures.
6.2.4

Cleaning the cleaning wiper

(1) Time for cleaning
Once a week, or when blurs or lacking parts appear on printed media after Head cleaning.
(2) Cleaning procedures
NOTE
Use the cleaning stick to clean the cleaning wiper.

For details of the cleaning stick, refer to "8.3 Options/Supply list".
Step 1: If the printer is switched ON, make sure the following.
Printing or other operations are not in progress.

The operation panel display is Normal.

Step 2: Display the CR Maintenance menu.
6-130
CS9360 User's Guide