Oce Arizona 500 User Manual page 91

Description
Carriage Rails
Cleaning Solution/
Fluid
Drip Roller
Encoder Strip
Heater Air Filters
Ink Supply Bottles
Ink Waste Container
Interior and Exterior
Left and Right End
Caps
Media Drive Roller
Media Encoder Turn
Bar
Plexiglas Windows
7/26/04
Procedure
Wipe clean with a lint-free cloth and alcohol
only. Use a lint-free cloth saturated (but not
dripping) with isopropyl alcohol (91% or higher
isopropyl alcohol and 9% or less deionized
water).
Refill or replace the bottle when low or as indi-
cated by control panel messages (see "Clean-
ing Solution/Fluid" on page 2-2).
Wipe clean with a lint-free cloth and cleaning
solution/fluid.
Wipe clean with a lint-free cloth and alcohol
only. Take extra care to not bend the strip.
Periodically inspect and replace the two
heater air filters (see "Heater Filters" on
page 5-16).
Replace when empty or as indicated by con-
trol panel messages (see "Ink Supply
Changes" on page 2-3).
Empty when control panel message indicates
the container is full. Follow ink MSDS require-
ments for disposal (see "Waste Container" on
page 2-2).
Wipe surfaces clean with a lint-free cloth and
alcohol only.
All doors must be closed or secured at all
times to capture fumes and heat.
Wipe clean with a lint-free cloth and alcohol
only.
Wipe clean with a sponge/scrubber and alco-
hol only (see "Cleaning the Media Drive
Roller" on page 5-5).
Wipe the cylindrical-shaped bar clean with a
lint-free cloth and alcohol.
Wipe clean with a lint-free cloth and alcohol
only.
Operator Maintenance Schedule
Frequency
Once a week
As required
Daily
Once a month
Every 60 days
or as required
As required
As required
Once a week
Always
Every media
change
Weekly
Every media
change
As required
5-3