Printer Filters; Purolator Hi-40 Filters; Figure 5-15 Purolator Hi-40 System Filters - Oce Arizona 500 User Manual

Printer Filters

5.7
Filter type, part number, and dimensions are documented on labels near the filter locations.
Replacement filters are available for purchase from Océ Display Graphics Systems. Contact
an Océ Display Graphics Systems supplies representative if you have any questions or for
more information on these filter types and service life.

Purolator Hi-40 Filters

5.7.1
System Filters
Four air system filters are required on the Arizona 500 printer. Each filter should be
inspected every two months. The filter should be replaced when the filter fabric begins to
discolor from the original condition or once every twelve months, whichever comes first.
They are located at the rear of the printer just below the electronic bay doors. The air system
filter (Dim: 9 1/2 in. x 16 1/2 in. x 1 in.) replacement is OIN #3011570041. These filters
easily slide in/out from underneath the printer (see Figure 5-15).
Note: An airflow direction arrow is printed on the side of the filter. The arrow should
be pointing up when installed because the air is being drawn up into the printer.
7/26/04

Figure 5-15 Purolator Hi-40 System Filters

Printer Filters
5-15