Table of Contents
Advertisement
Océ | Product Overview
Operator Requirements
1.2
Operators are responsible for the operation and, from time to time, performance of routine
printer maintenance. Operator maintenance schedule guidelines are included in this
manual (see "Maintenance Guidelines" on page 5-1). The diligent application of these
guidelines is essential to the optimum performance from your printer.
Important: The Arizona 500 printer requires two individuals for loading and
unloading media.
Switching On or Off
1.3
The printer is to be powered On/Off only by a trained and qualified service technician (see
Figure 1-2). Position the power cord so that it does not pose a hazard when someone walks
around or accesses the doors on the printer
Important: Full-time AC power is required to maintain negative pressure on the
inkjet heads. Without this pressure, ink will drain out of the heads until
the ink reservoirs are empty. If not rectified, permanent damage to the
heads could occur.
Figure 1-2 Circuit Breaker Switch Location
1-4
Advertisement
Table of Contents
