Table of Contents
Advertisement
Follow these steps to print the Nozzle Print (see Figure 4-10):
1.
Navigate to:
MAIN MENU
operator
2.
Press the ACCEPT. You then see:
OPERATOR
print parameters
3.
Press MENU. You then see:
OPERATOR
test prints
4.
Press ACCEPT. You then see:
TEST PRINTS
nozzle print
5.
Press ACCEPT. You then see:
NOZZLE PRINT
(1 - 100) pass
Use the +/- buttons to select the number of passes from 1 to 100.
6.
Press ACCEPT. The Nozzle Print begins printing.
Configuration Print
The Configuration Print menu provides the operator and Océ Display Graphics Systems
service technicians with machine-settings data if the unit must be diagnosed or recalibrated. A
previous print for the machine should be stored in one of the bays.
Follow these steps to print the configuration print:
1.
Navigate to:
TEST PRINTS
nozzle print
2.
Press the MENU button. You then see:
TEST PRINTS
configuration print
3.
Press the ACCEPT button. You then see:
CONFIGURATION PRINT
position: (right, center, or left)
Use the +/- buttons to select the required position.
7/26/04
Operator
4-11
Advertisement
Table of Contents
