Table of Contents
Advertisement
Roll-to-Roll Media Installation
9.
Align the media with the right side take-up core edge, then tape along the core in five
places. Tape the leading edge of the media to the core at the right side, the far left side,
and in three more places equally spaced at the middle (see Figure 3-11).
Figure 3-11 Align and Tape the Media
10.
Turn the take-up core with the taped media one revolution (see Figure 3-12). Engage
the pinch roller handle so that the left and right pinch rollers (only) touch both the
media and the drive roll. Flip up all others.
Figure 3-12 Rotate the Take-up Core
7/26/04
3-9
Advertisement
Table of Contents
