3.
Press ACCEPT. You then see:
Use +/- keys, attach
takeup, press ACCEPT
4.
Feed the media over the supply dancer roller and into the vacuum platen area. To
keep the media from falling back, gently feed the media down between the back wall
and the supply dancer assembly (see Figure 3-7).
Figure 3-7 Feeding Media Over the Platen
5.
If not already open, gently open the front door completely, and pull the pinch roller
handle to disengage the rollers (see Figure 3-8).
Figure 3-8 Pinch Roller Handle
7/26/04
Roll-to-Roll Media Installation
3-7