Sunsoft Pc-Nfs (Version 3.5) - Intel EtherExpress PRO/100 User Manual

C H A P T E R 2

SunSoft PC-NFS (version 3.5)

NDIS 2.0 Driver
1 Run the Intel Installation Program from Disk 1, Installation Disk.
2 Choose SunSoft PC-NFS from the Select Network Operating
System screen.
3 Follow the prompts to complete the Intel segment of the
installation.
4 Install PC-NFS for Ethernet according to instructions in the PC-
NFS documentation. Choose NDIS setup, and follow the
instructions to complete the setup. Note the prompt that tells you
that further manual modifications will have to be made.
5 Reboot the computer. You will see some error messages.
Disregard them and continue with these instructions.
6 Rename the file PROTOCOL.NFS in the C:\LANMAN directory
to PROTOCOL.INI. Use an text editor to edit the
PROTOCOL.INI file as follows:
Replace the items
[your-mac-module]
drivername = YOURMAC$
option1 = value1 etc.
[NFS-NDIS]
drivername = NFSLINK1
bindings = your-mac-module
with
[INTELNET]
drivername = INTEL$
[NFS-NDIS]
drivername = NFSLINK$
bindings = INTELNET
7 Be sure the keyword settings in the PROTOCOL.INI file in the
C:\LANMAN directory match the settings in in the sample
PROTOCOL.INI file contained in the C:\INTEL\M16A directory.
8 Copy the files M16ACFG.EXE and M16ANDIS.EXE from the
C:\INTEL\M16A directory to the C:\LANMAN directory.
9 Use a text editor to insert the following lines in your
CONFIG.SYS file:
50