Intel EtherExpress PRO/100 User Manual page 82

C H A P T E R 3
MODE
NETWORKADDRESS allows user to override adapter's unique
NODEADDRESS
NOCHECK
NOEARLYRX
NOEARLYTX
NOLED
PORT
S
SILENT
SINT
82
set this keyword to IO to disable requests
for memory-mapped mode on systems that
only support an I/O-driven card. The
MEMORY setting provides increased
performance on computers that allow
simultaneous availability of memory and
I/O resources.
network node address by specifying a
different node address. Network node
address can be displayed with the
M16ATEST utility (MS-DOS).
see NETWORKADDRESS.
disables verification of adapter resources,
for troubleshooting purposes.
disables Advanced Look-ahead Pipelining
features of the Intel PRO/100 PC Card. This
parameter should be used in the NET.CFG
file when the ODI driver is used with
Microsoft Windows for Workgroups 3.11.
disables early transmit features of the Intel
PRO/100 PC Card. Try using this keyword
if you are experiencing a large number of
transmit underruns (in which hardware
reports not finding expected data in the
transmit buffer).
turns off LED indicators on LAN adapter
module to conserve power.
(ODI) see IOADDRESS.
(ODI)(MS-DOS command line only)
displays LAN drivers resident in memory.
(M16ATEST) disables display of informa-
tion on the screen and returns DOS error
code when tests are complete.
(Packet Driver) is number from hexadeci-
mal 60 to 80 designating a software
interrupt. Default is 60.