Intel EtherExpress PRO/100 User Manual page 100

C H A P T E R 4
denied," try loading M16ACFG.EXE immediately before the
Card and Socket Services "generic card driver" described above.
F If the Intel driver still fails to load, try using the PRO/100 PC
Card without Card and Socket Services, as described in the
following section.
Phoenix
The Phoenix Card and Socket Services super client driver
PCMSCD.EXE should NOT be configured with the PCM.EXE
program to support the PRO/100 PC Card. Use the default setup
and the following sequence of commands in your CONFIG.SYS
file.
DEVICE=C:\PCMPLUS3\PCMSS.EXE
DEVICE=C:\PCMPLUS3\PCMCS.EXE
DEVICE=C:\PCMPLUS3\PCMRMAN.SYS
DEVICE=C:\INTEL\M16A\ODI\M16ACFG.EXE
DEVICE=C:\PMCPLUS3\PCMSCD.EXE
(called a "generic" card driver)
Be sure to verify that an EMM386 memory exclusion has been
stated to cover the region where the Intel card loads.
SystemSoft
The SystemSoft's CardSoft Card and Socket Services are loaded
in the CONFIG.SYS file and generally include the following
lines:
DEVICE=C:\CARDSOFT\SOCKET_SERVICES_DRIVER
(This file varies by machine type)
DEVICE=C:\CARDSOFT\CS.EXE
DEVICE=C:\CARDSOFT\CSALLOC.EXE C:\CARDSOFT\CSALLOC.INI
DEVICE=C:\CARDSOFT\CARDID.EXE
(called a "generic" card driver)
Resources assigned by CardSoft Card and Socket Services are
controlled by the files CSALLOC.INI and CARDID.INI.
CSALLOC.INI contains a list of resources available to Card and
Socket Services. CARDID.INI controls how resources will be
assigned to specific types of cards. The setting in the PRO/100
100