Intel EtherExpress PRO/100 User Manual page 18

C H A P T E R 2
3 Select your network operating system from the list displayed and
click OK.
4 Follow the on-screen instructions. Note the following variations
for NetWare and other network operating systems:
Novell NetWare Installation
With Novell NetWare highlighted, click the OK button. Intel
provides all software necessary to configure your NetWare
client workstation. Upon completion, the Installation Program
will reboot your system. When your system comes back up, log
in to the network.
Note
The NetWare VLM shell is used to connect to your NetWare
server. The Intel Installation Program will decompress and
configure the necessary files. If you do not plan to use the
Installation Program, see "Manual Installation" in the
alphabetical section of this chapter for instructions on how
to decompress and load the NetWare VLM files.
If you need NETX shell support, contact your System
Administrator.
Installation of Other Network Operating Systems
For listed network operating systems other than Novell Net-
Ware, highlight your network operating system and click the
OK button. The Intel installation software will analyze your
system and create a custom Intel Network Drivers (device
drivers) Disk.
5 Once you have completed the steps prompted by the Intel
Installation Program, exit the program and find your network
operating system in this chapter of the User's Guide, using the
alphabetical listing under the heading "Installing Network
Software." Follow the procedures indicated there to complete
the installation.
The Installation Program will modify your AUTOEXEC.BAT,
CONFIG.SYS, and network configuration files to match the optimum
configuration for your system.
18