Ungermann-Bass Net/One For Dos And Os/2 - Intel EtherExpress PRO/100 User Manual

C H A P T E R 2

Ungermann-Bass Net/One for DOS and OS/2

NDIS 2.0 Driver
The PRO/100 PC Card is supported on Ungermann-Bass Net/One LAN
Manager and MS-NET networks. There are two NDIS driver packages
available from UB: XNS BNS/NDIS and TCP BNS/NDIS. These
packages, used with a Intel NDIS driver, provide files that support
DOS and OS/2 workstations. They are available from UB and
authorized UB representatives.
Ungermann-Bass Net/One LAN Manager version 2.1
Installation
1 Begin installation of LAN Manager 2.1 using "setup."
2 When prompted to select the available network adapter driver,
choose "Other Driver."
3 When prompted, insert the Intel Network Drivers Disk.
4 Select "Intel EtherExpress PRO/100 Mobile Adapter 16-bit PC
Card" from the menu.
5 Continue with the installation until it is completed.
6 Copy the file M16ACFG.EXE from the root directory of your
Intel Network Drivers Disk to the drive and directory where you
installed your network operating system.
7 Following the UB instructions, modify your CONFIG.SYS file by
adding the following lines:
For DOS:
DEVICE = [ path ]M16ACFG.EXE DRIVER=NDIS
DEVICE = [ path ]M16ANDIS.EXE
For OS/2:
DEVICE = [ path ]M16ANDIS.OS2
where [path] is the drive and directory in which you installed your
network operating system.
8 Use a text editor to modify your PROTOCOL.INI file as follows:
• For each protocol that you want to bind, set the protocol
definition area of the PROTOCOL.INI file to:
BINDINGS = UBLOOP
• At the end of the file, add the following fragments:
52