Ftp Software Pc/Tcp - Intel EtherExpress PRO/100 User Manual

C H A P T E R 2

FTP Software PC/TCP

Packet, NDIS 2.0, and ODI Drivers
FTP Software's PC/TCP Generic Ethernet Kernel ETHDRV.EXE can
be installed using Intel's Packet, ODI, or NDIS drivers. PC/TCP can
also be used concurrently with NetWare. For information on which
driver is appropriate for your network environment, see the FTP PC/
TCP documentation. For environments using values other than those
set by the Intel Installation Program, see Chapter 3, Configuration
Reference in this manual.
FTP PC/TCP 3.X with OnNet 1.1 and Windows for
Workgroups 3.11
1 Run the Intel Installation Program from Disk 1, Installation Disk.
2 From the Select Network Operating System screen, choose
Microsoft Windows for Workgroups then FTP PC/TCP 3.x.
3 Follow the prompts to complete the Intel segment of the
installation.
4 Run the PC/TCP installation program OnNet 1.1.
5 Follow the prompts to the Network Card Screen, then select
"Other NDIS Driver or Updated Packet Driver."
6 Insert the Intel Network Drivers Disk (Disk 2) when prompted.
7 Choose the appropriate driver then follow prompts to complete
the installation.
8a For NDIS installation, reboot the PC.
8b For ODI installation, do not reboot. Continue with step 9.
Additional Steps for ODI Installation
If you are using an ODI driver, continue with the following steps:
9 Change to the directory into which PC/TCP was installed.
10 Use a text editor to change the file PCTCP.INI as follows:
• In the section PCTCP ifcust 0 change the line
interface-type=NDIS
to read
interface-type=PKTDRV.
11 Save the file and exit the text editor.
28