Intel EtherExpress PRO/100 User Manual page 81

INTERRUPT
IOADDRESS
I/O PORT
IOWAITSTATES
LINESPEED
LINKDISABLE
LINKINTEGRITY
LINK DRIVER
MEM
MEMORY
MEMWAITSTATES
specifies a PC Card port hardware
interrupt. Use 10 or 11 on most PCs.
Default (if parameter not specified) is 5.
Use 0 (zero) to force the adapter into a
polled mode.
specifies the base I/O address of the Intel
adapter I/O ports, in hexadecimal notation.
Default address is 320.
see IOADDRESS.
specifies the number of wait states to use
for accesses to the Intel adapter.
forces operation at 10 or 100Mbps. If the
keyword is not stated, the line speed will be
automatically detected.
disables link integrity for non-IEEE
10BASE-T networks such as StarLAN 10.
Without this keyword in the driver com-
mand line, the driver defaults to link
integrity ENABLED.
(NDIS 3) when set to OFF, operates like the
LINKDISABLE parameter.
LINK DRIVER M16AODI required as
first item in the NET.CFG file listing
configuration parameters for the M16AODI
driver. This must be the first keyword in the
section of the NET.CFG file for the Intel
adapter.
see MEMORY.
specifies the host PC memory location for
the Intel adapter in hexadecimal notation,
when. MODE MEMORY (memory-mapped
I/O) is being used (see MODE). The
memory block occupies 4Kbytes of host
memory.
specifies the number of waitstates to use for
memory accesses to the Intel adapter.
Values are decimal 1 to 3. The keyword is
provided as a troubleshooting aid.
Configuration Reference
81