Microsoft Windows 95 - Intel EtherExpress PRO/100 User Manual

C H A P T E R 2

Microsoft Windows 95

Instructions are provided here for "Plug and Play" installation. For
detailed technical information see Windows 95 headings in Chapter 3,
Configuration Reference and Chapter 4, Troubleshooting.
NDIS 3 Driver
1 Insert the PRO/100 PC Card into a PC Card slot.
2 If Windows 95 detects the PRO/100 PC Card, proceed to step 3.
If it does not, click on the PC Card (PCMCIA) icon in the
Control Panel to enable PC Card services, then go to step 3.
3 If prompted for a manufacturer's disk, insert Disk 2, Network
Drivers Disk. Windows will identify the product as a "PRO/100
Mobile Adapter 16."
4 Complete the installation process as prompted by the Windows
95 software.
Technical Note
For best results with autodetection, do not load DOS real
mode PCMCIA Card and Socket Services and do not use
EMM386 (or if needed, do not use the HIGHSCAN key-
word). If installing from a SCSI CD-ROM through a PC
Card, copy the \WIN95 directory from the CD-ROM to your
hard disk (35 MB required) and install from the hard disk.
For a more detailed discussion of these issues, see Chapter
4, Troubleshooting.
5 If the automated (autodetection) installation procedure is not
successful, proceed to the following section: "Verification and
Troubleshooting."
Verification and Troubleshooting
1 To verify successful installation, double-click the System icon in
the Control Panel, choose the Device Manager tab in the System
Properties window, and look for Intel EtherExpress PRO/100
Mobile PC Card under Network adapters.
• If the PRO/100 Mobile 16 icon has no X or circled exclama-
tion point on top of it, the installation has been successful.
Click OK to close the Network window, then restart the
computer when prompted. If you wish to verify configuration
14