Intel EtherExpress PRO/100 User Manual page 98

C H A P T E R 4
B When the PRO/100 PC Card driver is loaded it either reads a
configuration file or uses command line parameters to determine
which resources it should use. The following is a list of driver
types, driver file names, and the configuration method used by
each:
Type File Name
ODI M16AODI.COM
NDIS2 M16ANDIS.EXE
Packet M16APD.EXE
Test M16ATEST.EXE
The default resources used by the PRO/100 PC Card in the
absence of a contrary setting in the configuration file or on the
command line are:
MEMORY
IRQ
IOADDRESS (NDIS) 320
PORT (ODI)
C Card and Socket Services will generally try to assign a set of
resources (interrupt, memory window, I/O window) to the PRO/
100 PC Card. The resources configured for the PRO/100 PC
Card (in a configuration file or on a command line) must match
the resources assigned by Card and Socket Services. If they do
not, the driver will generally fail to load.
The way resources are assigned to the PC Card varies among
Card and Socket Services manufacturers. The following section
provides guidelines for the most popular Card and Socket
Services. Review your Card and Socket Services documentation.
To use Card and Socket Services with the PRO/100 PC Card,
you must know what resources will be assigned by Card and
Socket Services, then specify the same resources when configur-
ing the PRO/100 PC Card.
98
Configuration Method
reads NET.CFG file
reads PROTOCOL.INI file
uses COMMAND LINE
parameters
uses COMMAND LINE
parameters
D2000-D2FFF
5
320