Intel EtherExpress PRO/100 User Manual page 30

C H A P T E R 2
to read
interface-type=PKTDRV
10 Save the file and exit the text editor.
11 Change to the C:\ (root) directory.
12 Use a text editor to modify the AUTOEXEC.BAT file as follows
(\PCTCP is the default installation directory):
• Move the line containing the STARTNET.BAT command or
the lines containing the network driver files to immediately
above the line
SET PCTCP=C:\PCTCP\PCTCP.INI
• Add the line
C:\PCTCP\ODIPKT
after the line
PCTCP=C:\PCTCP\PCTCP.INI
13 Save the file and exit the text editor.
14 Copy the file ODIPKT from disk 5 of the FTP PC/TCP
installation disks to the directory into which PC/TCP was
installed.
15 Reboot the PC.
FTP Software PC/TCP Packet Driver Installation
1 Run the Intel Installation Program from Disk 1, Installation Disk.
2 Choose FTP PC/TCP from the Select Network Operating System
screen.
3 Follow the prompts to complete the Intel segment of the
installation.
4 Install PC/TCP software according to the directions given in the
PC/TCP documentation.
5 Copy the files M16ACFG.EXE, M16APD.COM, and
INTELPD.BAT from the C:\INTEL\M16A directory to the PC/
TCP directory specified in the PC/TCP install procedure. The file
INTELPD.BAT contains the correct command lines for the Packet
Driver.
30