Intel EtherExpress PRO/100 User Manual page 63

SET LAN_CFG=C:\LANTASTI
REM IF LANTASTIC IS DISABLED, SKIP EVERYTHING.
IF EXIST DISABLED GOTO :STARTNET_DONE
@ECHO ===== BEGIN LANTASTIC CONFIGURATION =====
PATH C:\LANTASTI;%PATH%
SET LAN_DIR=C:\LANTASTI.NET
LOADHIGH AI-NDIS BIND_TO=M16ANDIS_NIF
AILANBIO @STARTNET.CFG
REDIR T4700 @STARTNET.CFG
IF EXIST NOSHARE GOTO :NOSHARE
SERVER C:\LANTASTI.NET @STARTNET.CFG
NET LOGIN \\T4700
GOTO :CONTINUE
:NOSHARE
@ECHO LANTASTIC SERVER WAS INSTALLED BUT TURNED OFF.
:CONTINUE
REM IF CONNECT.BAT EXISTS, RUN IT TO SET UP CONNECTIONS
IF EXIST CONNECT.BAT GOTO :CONNECT
REM OTHERWISE SET UP CONNECTIONS SPECIFIED DURING
INSTALL.
NET USE LPT1: \\T4700\@PRINTER
NET LPT TIMEOUT 10
GOTO :CONNECT_DONE
:CONNECT
@ECHO SETTING UP LANTASTIC CONNECTIONS FROM CONNECT.BAT
REM BUILD CONNECT.BAT LIKE THIS: "NET SHOW/BATCH
>C:\LANTASTI\CONNECT.BAT"
REM (OR RUN THE BATCH FILE SETNET.BAT)
CALL CONNECT.BAT
:CONNECT_DONE
NET POSTBOX
@ECHO ===== END LANTASTIC CONFIGURATION =====
:STARTNET_DONE
CD \
Banyan VINES 5.5 (Windows 3.x)
Note
If you are using DOS Multi-menu CONFIG.SYS, the three
VINES related lines in the CONFIG.SYS will be located at the
end of your CONFIG.SYS. You will have to manually move
those lines into the proper menuitem section of your
CONFIG.SYS. If you get Banyan VINES Error codes 10xx,
check C:\VINES\NDISBAN.DOC for explanations of error
codes.
Sample CONFIG.SYS
DEVICE=C:\DOS\HIMEM.SYS
REM INTEL PRO/100 ADAPTER — DO NOT CHANGE LINES BELOW
(EMM)
DEVICE=C:\DOS\EMM386.EXE NOEMS X=D200-D2FF
Configuration Reference
63