Microsoft Windows For Workgroups - Intel EtherExpress PRO/100 User Manual

C H A P T E R 2

Microsoft Windows for Workgroups

NDIS 2.01 and ODI Drivers
Instructions are provided for installing Intel network drivers for the
first time on a system using Windows for Workgroups version 3.11
alone or with NetWare. These instructions assume that Windows for
Workgroups has already been installed. Remove any earlier version of
the Intel drivers before installing the new version. No NDIS 3 driver is
supplied for Windows for Workgroups.
The following topics are covered for Windows for Workgroups:
• How to install for Windows for Workgroups version 3.11 and
NetWare using the ODI driver
• How to install for Windows for Workgroups 3.11 using the NDIS
2.0 driver
• How to remove an existing Windows for Workgroups Installation
For troubleshooting tips for Windows for Workgroups, see Chapter 4,
Troubleshooting.
Windows for Workgroups Version 3.11 and NetWare (Using
the ODI driver)
1 To configure Windows for Workgroups with NetWare, run the
Intel Installation Program and choose Novell NetWare.
2 When the installation is complete, reboot the computer.
3 At the Intel menu, choose "Load Intel EtherExpress PRO/100
Mobile Adapter16 for Network Access."
4 From the DOS prompt, run the NetWare Client install. Be sure to
install support for Microsoft Windows.
5 When the Novell Client install program asks for an ODI driver,
insert the Intel Network Drivers Disk.
6 Complete the installation process and reboot the computer.
7 Log in to NetWare.
8 Start Windows for Workgroups and, in the Network program
group, double-click on the Network Setup icon.
40