Intel EtherExpress PRO/100 User Manual page 104

C H A P T E R 4
Drivers do not load on the IBM 755 or the IBM 360.
Add MODE IO to NET.CFG or MODE=IO to PROTOCOL.INI.
Try using memory location C800.
Make sure the sound card is not using the same interrupt as the Intel
adapter (Intel defaults to 5; if this is being used, try 11).
If loading Card and Socket Services, run M16ACFG from the
CONFIG.SYS before AUTODRV.SYS. Also, edit the
AUTODRV.INI file (found in the C:\THINKPAD directory) and in
Ethernet section make the modification cardid=ETHER,CREDI. In the
same location put a semi-colon (;) as the first character of the line
OPTION=IGNORE.
When executing M16ACFG.EXE, error "exclusive use denied" occurs.
Driver does not load.
Load M16ACFG.EXE before the CARDID.EXE or PCMSCD.EXE if
using System Soft or Phoenix respectively.
Drivers don't load on DATABOOK or TCIC based PC Card chipset
machines.
Use the parameter INT 10 in NET.CFG or INT=10 in
PROTOCOL.INI.
List of common Databook machines that require INT 10:
Acernote 750 c
ACOM 486/66
AMS 486/66
Aquiline 486/66
Arima 486/66
Austin 66, 100 and 50MHz machines.
Chaplett
Compuadd
Compuydne 486/66
Epson Actionnote 4000
Ergo Powerbrick 486/66
Express Micro
104