C H A P T E R 2
8 From the Configuration tab in the Network window, click Add.
9 From the Select Network Component Type window, select
Protocol and click Add.
10 Select Microsoft as the manufacturer and IPX/SPX-compatible
Protocol under Network Protocols, then click OK to return to the
Network window.
11 Click OK to close the Network window, then restart the com-
puter when prompted.
Microsoft Windows NT 4.0
NDIS 3 Driver
If your system is running Windows NT 4.0, proceed as follows:
1 Insert the PRO/100 PC Card into a PC Card slot.
2 Select Control Panel, double-click the Network icon. Click the
Adapters tab and then Add.
3 Insert Disk 2, Network Drivers Disk and click Have Disk.
Specify A:\ for diskette and click OK.
4 Select "EtherExpress PRO/100 PC Card Adapter 16."
5 Click Close when the drivers have been copied.
6 Restart your computer when prompted by NT.
Microsoft Windows NT 3.51
NDIS 3 Driver
If your system is running Windows NT 3.51, proceed as follows:
1 Insert the PRO/100 PC Card into a PC Card slot.
2 Select Control Panel, Network, Add Adapter, and Other.
3 When prompted for a manufacturer's disk, insert Disk 2,
Network Drivers Disk.
4 Select "EtherExpress PRO/100 PC Card Adapter 16."
16