Intel EtherExpress PRO/100 User Manual page 76

C H A P T E R 3
implement the appropriate parameters when the network driver is
loaded.
NDIS 2.0.1 DOS Driver Configuration Notes
The DOS NDIS driver M16ANDIS.EXE conforms to the 3Com/
Microsoft LAN Manager Network Driver Interface Specification
(NDIS) version 2.0.1. It is a DOS-based executable terminate-and-
stay-resident (TSR) program that will configure itself according to the
options specified in the PROTOCOL.INI file, which is supplied on the
Network Drivers Disk.
The files required for using M16ANDIS.EXE are:
PROTOCOL.INI
M16ADOS.NIF
M16ANDIS.EXE
If Card and Socket Services are loaded, the Intel resource manager
M16ACFG.EXE must be run before M16ANDIS.EXE to establish
connection between the PRO/100 PC Card and the computer.
Most installations will be able to use the settings implemented in the
PROTOCOL.INI file by the Intel Installation Program. If any param-
eters need to be changed, use an ASCII text editor to modify the
PROTOCOL.INI file with the appropriate keywords and values.
Keyword syntax for PROTOCOL.INI can be found below. Keywords
are not case sensitive, and can be abbreviated to a unique sequence of
initial characters (for example, IN for INTERRUPT, IO for
IOADDRESS). A Keyword Alphabetical Reference follows the
keyword listings.
NDIS 2.0.1 OS/2 Driver Configuration Notes
The OS/2 NDIS driver M16ANDIS.OS2 conforms to the 3Com/
Microsoft LAN Manager Network Driver Interface Specification
(NDIS) version 2.0.1. It is an IBM OS/2-based device driver for use
with OS/2 versions 2.0 and later.
The files required for using M16ANDIS.OS2 are:
PROTOCOL.INI
M16AOS2.NIF
76
Configuration and binding information
file
Intel installation file for Microsoft LAN
Manager
Intel DOS NDIS 2.0.1 driver
Configuration and binding information
file
Intel installation file for Microsoft
LAN Manager