Troubleshooting
Transmit Test Window
This test transmits a packet every 1/2 second. A failure indicates that
the PRO/100 PC Card is not accepting packets for transmission.
Network Traffic Graph Window
This graph provides a visual representation of the volume of traffic on
the local area network (LAN). If there is no traffic or if the PRO/100
PC Card is not connected to the LAN, a line of dots will display.
Instantaneous Packets - Displays the number of packets on the
network at half-second intervals.
Error Messages
Except as noted, these messages are specific to the Intel PRO/100 PC
Card. They are listed in strict numerical/alphabetical order, i.e.,
numbers appear before letters and messages starting with "The" are
under the letter T, initial "A" or "An" under the letter A.
For an explanation of other messages that may appear on the screen,
see the network-specific or computer-specific troubleshooting later in
this chapter, as well as your computer and network operating system
documentation.
An invalid I/O address was specified
The Intel PRO/100 PC Card requires 16 consecutive I/O locations.
This message indicates that the I/O address specified does not start on
a 32-byte boundary. The I/O address must begin on a 32-byte bound-
ary. The PRO/100 PC Card supports all 32-byte boundary addresses
within the range defined by the platform. Some examples of valid I/O
addresses, in hexadecimal notation, are 300, 320, 240. Examples of
invalid I/O addresses are 301, 325, 247.
A PC Card was not detected
89