Getting Started; Unpacking; System Requirements; Bios Version - Intel NetStructure ZT 5515 Product Specification

Getting Started

3.1
Note: This board must be protected from static discharge and physical shock. Never remove any of the
3.2
3.2.1
®
Intel NetStructure
Downloaded from Elcodis.com electronic components distributor
This chapter summarizes the information needed to make the ZT 5515 operational. This chapter
should be read before using the board.

Unpacking

Check the shipping carton for damage. If the shipping carton and contents are damaged, notify
Intel Customer Support. Retain the shipping carton and packing material for inspection by the
carrier. Obtain authorization before returning any product to Intel.
Refer to Appendix F, "Customer Support"
socketed parts except at a static-free workstation. Use the anti-static bag shipped with the product
to handle the board. Wear a wrist strap grounded through one of the system's ESD Ground jacks
when servicing system components.

System Requirements

The following topics briefly describe the basic system requirements and configurable features of
the ZT 5515. Links are provided to other chapters and appendices containing more detailed
information.

BIOS Version

For proper operation, the ZT 5515 must run the AMI Embedded BIOS, revision C01 or P01 and
later (P01-Pxx). The revision level is shown in the BIOS Identification string displayed during the
Power On Self Test (POST). The revision level is the fourth field in the BIOS ID string. The Intel
NetStructure Embedded BIOS Manual is available from Intel's Web site
developer.intel.com/design/network/products/cbp/linecard.htm).
TM
ZT 5515 Compute Processor Board Technical Product Specification
for assistance information.
Getting Started
3
(http://
21