Ndis 2.0.1 Settings (For Drivers M16Andis.exe And M16Andis.os2) - Intel EtherExpress PRO/100 User Manual

NET.CFG
M16AODI.OS2
Most installations will be able to use the settings implemented in the
NET.CFG file by the Intel Installation Program. If any parameters
need to be changed, use an ASCII text editor to open and modify the
NET.CFG file and insert the appropriate keywords and values after the
line
LINK DRIVER M16AODI
Parameters can also be implemented on the command line. Keyword
syntax can be found below. Keywords are not case sensitive. A
Keyword Alphabetical Reference follows the discussion of keyword
syntax.
NET.CFG Example
LINK DRIVER M16AODI
INT 5
PORT 280
MEM D2000
M16AODI.OS2 Keywords
Keyword
FULLDUPLEX
INTERRUPT
IOADDRESS
IOWAITSTATES
LINESPEED
LINKDISABLE
LINK DRIVER M16AODI (REQUIRED FIRST ITEM IN NET.CFG)
MEMORY
MEMWAITSTATES
MODE
NOCHECK
VERI-
NOEARLYRX
NOEARLYTX
NOLED
SOCKET
WORDSIZE
NDIS 2.0.1 Settings (for drivers M16ANDIS.EXE and
M16ANDIS.OS2)
Custom parameters for the NDIS driver can be set up with the Intel
Installation Program or entered manually, using an ASCII editor, in
the PROTOCOL.INI file. If Card and Socket Services are being
used, the Intel M16ACFG.EXE resource manager program will
Network configuration file
Intel ODI driver for OS/2
Default
(NO KEYWORD = FULL-DUPLEX DISABLED)
5
320
0
AUTO
(NO KEYWORD = LINK INTEGRITY EN
ABLED)
D2000
0
MEM
(NO KEYWORD = ADAPTER RESOURCE
(NO KEYWORD = EARLY RECEIVE EN
ABLED)
(NO KEYWORD = EARLY TRANSMIT EN
ABLED)
(NO KEYWORD = LEDS ENABLED)
AUTO
16
Configuration Reference
Valid Values
(3 - 15)
(240 - 380)
(1 - 3)
(10 OR 100)
(C0000 - EE000)
(1 - 3)
(MEM OR IO)
FICATION ENABLED)
(1 - 4)
(8 OR 16)
75