Intel EtherExpress PRO/100 User Manual page 115

The NOCHECK keyword must be added to the NET.CFG,
PROTOCOL.INI or command line.
Gateway ColorBook DX/75
The Gateway Colorbook DX/75 must use a MEMWAITSTATES = 1
keyword in either NET.CFG or PROTOCOL.INI files in order to
function.
Gateway ColorBook 40MHz and 75MHz
These computers must run in I/O mode and need to have the keyword
MODE IO in the NET.CFG file or MODE=IO in the PROTOCOL.INI
file.
Gateway ColorBook series
DEVICE=C:\DOS\EMM386.EXE NOEMS X=D000-DFFF
DEVICE=C:\CARDSOFT\SSCIRRUS.EXE
DEVICE=C:\CARDOSFT\CS.EXE
DEVICE=C:\CARDSOFT\CSALLOC.EXE
REM DEVICE=C:\CARDSOFT\ATADRV.EXE
REM DEVICE=C:\CARDSOFT\MTSRAM.EXE
REM DEVICE=C:\CARDSOFT\MTDDRV.EXE
DEVICE=C:\CARDSOFT\CARDID.EXE
The above configuration will work with the PRO/100 PC Card driver
at memory location D2000.
GRiD Convertible
This computer must run in I/O mode and needs to have the keyword
MODE IO in the NET.CFG file or MODE=IO in the PROTOCOL.INI
file.
IBM ThinkPad 350, 755CS
DEVICE=C:\DOS\EMM386.EXE X=C800-CFFF
The switch X=C800-CFFF on the EMM386 line must be used with the
configuration below.
DEVICE=C:\THINKPAD\IBMDSS01.SYS
DEVICE=C:\THINKPAD\IBMDOSCS.SYS
DEVICE=C:\THINKPAD\DICRMU01.SYS /MA=C800-CFFF
Troubleshooting
115