Novell Server Driver Settings (For Driver M16Aodi.lan); Packet Driver Settings (For Driver M16Apd.com) - Intel EtherExpress PRO/100 User Manual

C H A P T E R 3
M16ACFG.EXE must be loaded before the NDIS driver if Card and
Socket Services is being used.
Novell Server Driver Settings (for driver
M16AODI.LAN)
The driver M16AODI.LAN conforms to the Novell "ODI NetWare
Server Driver Development Tool Kit Driver Specification" version
3.3. It is a 32-bit driver. The NetWare Server ODI stack including
M16AODI.LAN supports NetWare versions 4.1 and 4.11.
Novell Server Driver Keywords
Parameters for configuring the Novell server driver must be specified
on the command line.
Keyword
FULLDUPLEX
INT=
IOWAITSTATES=
LINESPEED=
LINKDISABLE
MEM=
MEMWAITSTATES=
MODE=
NOCHECK
NOEARLYRX
NOEARLYTX
NOLED
PORT=
SOCKET=
WORDSIZE=

Packet Driver Settings (for driver M16APD.COM)

Packet driver parameters must be stated on the M16APD.COM
command line when running the packet driver.
Packet Driver Configuration Notes
The Intel packet driver M16APD.COM conforms to FTP Software's
public domain packet-driver specification. It is a DOS-based termi-
nate-and-stay-resident (TSR) program. The driver file M16APD.COM
is located in the \PKTDRV directory on the Network Drivers Disk.
Refer to your network documentation for instructions on how to install
the packet driver with your network. Most installations should be able
to use the default settings listed below. If Card and Socket Services
are loaded, run the utility M16ACFG.EXE before running
M16APD.COM.
78
Default
(NO KEYWORD = FULL-DUPLEX DISABLED)
5
0
AUTO
(NO KEYWORD = LINK INTEGRITY EN-
ABLED)
D100
0
MEM
(NO KEYWORD = ADAPTER RESOURCE
VERIFICATION ENABLED)
(NO KEYWORD = EARLYRX ENABLED)
(NO KEYWORD = EARLYTX ENABLED)
(NO KEYWORD = LEDS ENABLED)
320
AUTO
16
Valid Values
(3 - 15)
(1 - 3)
(10 OR 100)
(C000 - EE00)
(1 - 3)
(MEM OR IO)
(240 - 380)
(1 - 4)
(8 OR 16)