The PRO/100 PC Card hardware is compatible with all type II and III
PC Card slots (16-bit or 32-bit). Installation and removal procedures
may vary on different computers. It can safely install in a CardBus, 32-
bit slot.
Installing the Hardware
Insert the PRO/100 PC Card
1
Grasp the PRO/100 PC Card by the edges with the Intel label
facing upward and the wide PC Card connector next to the insert
slot.
2
Insert the PRO/100 PC Card into a PC Card slot and push it in until
it is firmly seated (the Intel Installation Program will determine
what slot the PRO/100 PC Card is in and configure accordingly).
Inserting the PRO/100 PC Card into the Computer
Removing the PRO/100 PC Card
Follow the PC card removal instructions specified in the documentation
for your computer.
Hardware Installation
9