C H A P T E R 2
FTP Software LANWatch
Packet and NDIS 2.0 Drivers
FTP Software's LANWatch network monitor software can be installed
using Intel's packet or NDIS 2.0 drivers. For information on which
driver is appropriate for your network environment, refer to the FTP
LANWatch documentation.
FTP Software LANWatch Packet Driver Installation
1
Run the Intel Installation Program from Disk 1, Installation Disk.
2
Choose FTP LANWatch from the Select Network Operating
System screen.
3
Follow the prompts to complete the Intel segment of the
installation.
4
Install LANWatch according to the instructions in your FTP
LANWatch manual.
5
Copy the files M16ACFG.EXE, M16APD.COM, and
INTELPD.BAT from the C:\INTEL\M16A directory to the
directory where your LANWatch files are stored. The file
INTELPD.BAT contains the correct command lines for the Packet
Driver.
6
(This step is not required for LANWatch versions 3.0 and later.)
Using a text editor, add the following line to your CONFIG.SYS
file:
DEVICE = [ path ]IFCUST.SYS
where [path] is the drive and directory where your LANWatch
files are stored.
7
Reboot the PC.
8
Change to the directory of where your LANWatch files are stored
and run INTELPD.BAT
9
Run LW.EXE.
26