Intel EtherExpress PRO/100 User Manual page 43

Windows for Workgroups 3.11 Using the NDIS 2.0 Driver
1 Run the Intel Installation Program from Disk 1, Installation Disk.
2 Choose Microsoft Windows for Workgroups installation from the
Select Network Operating System screen.
3 Choose "No" on the Attached to Network File Server screen.
4 Follow the prompts to complete the Intel segment of the
installation.
5 Start Windows for Workgroups and double-click on the Network
Setup icon in the Network Group.
6 If you have not installed network support, choose Networks in the
Network Setup dialog box, select Install Microsoft Windows
Network, and click OK. Otherwise proceed to Step 7.
7 In the Network Setup dialog box, choose Drivers.
8 In the Network Drivers dialog box, choose Add Adapter.
9 In the Add Network Adapter box, choose Unlisted or Updated
Network Adapter and click OK.
10 When prompted for an "unlisted, updated, or vendor-provided
network driver disk," insert the Intel Network Drivers Disk.
11 Select "Intel M16A NDIS 2.01 Real Mode" and click OK.
12 Close the Network Drivers dialog box and click OK in the
Network Setup box.
13 Complete the installation process, inserting the Intel Network
Drivers Disk if required.
Software Installation
43