Intel EtherExpress PRO/100 User Manual page 116

C H A P T E R 4
DEVICE=C:\THINKPAD\$ICPMDOS.SYS
REM DEVICE=C:\THINKPAD\AUTODRV.SYS
C:\THINKPAD\AUTODRV.INI
The above line has been changed to prevent AUTODRV.SYS from
loading. The above configuration will work with the PRO/100 PC
Card driver at memory location C8000.
IBM ThinkPad 355, 360, 755
Set the keyword WORDSIZE=8 in your PROTOCOL.INI file or on
the command line, or WORDSIZE 8 in your NET.CFG file.
IBM ThinkPad 360CS
DEVICE=C:\DOS\EMM386.EXE X=C800-CFFF
The switch X=C800-CFFF on the EMM386 line must be used with the
configuration below.
DEVICE=C:\THINKPAD\IBMDSS01.SYS
DEVICE=C:\THINKPAD\IBMDOSCS.SYS
DEVICE=C:\THINKPAD\DICRMU01.SYS /MA=C800-CFFF
DEVICE=C:\THINKPAD\$ICPMDOS.SYS
DEVICE=C:\[PATH]\M16ACFG.EXE
where [path] defines the location of M16ACFG.EXE for your
network. This line is necessary to prevent a conflict between
AUTODRV.SYS and M16ACFG.EXE. M16ACFG.EXE should
not be loaded at a later time.
DEVICE=C:\THINKPAD\AUTODRV.SYS
C:\THINKPAD\AUTODRV.INI
The above configuration will work with the PRO/100 PC Card driver
at memory location C8000.
IBM ThinkPad 360
The IBM ThinkPad 360 must use a MEMWAITSTATES = 1 keyword
in either NET.CFG or PROTOCOL.INI files in order to function.
IBM 720
The IBM 720 needs to be run in 25 MHz mode in order to support this
card.
116