Intel EtherExpress PRO/100 User Manual page 99

Note
You can display a list of resources available on your
computer by running the Intel resource manager
M16ACFG.EXE with the /DEBUG parameter, with no
network drivers loaded.
D If your computer requires Card and Socket Services, run the
resource manager M16ACFG.EXE before loading the PRO/100
PC Card driver to ensure that everything works together.
Suggestions arranged by Card and Socket Services manufactur-
ers follow:
IBM
The following are the files generally loaded with IBM Card and
Socket Services.
DEVICE=C:\THINKPAD\IBMDSS01.SYS /S0=2
DEVICE=C:\THINKPAD\IBMDOSCS.SYS
DEVICE=C:\THINKPAD\DICRMU01.SYS /MA=C800-CFFF (/MA
should match the EMM386 exclusion)
DEVICE=C:\THINKPAD\AUTODRV.SYS
C:\THINKPAD\AUTODRV.INI (called a "generic" card driver)
The AUTODRV.INI file is used to assign resources to the PRO/
100 PC Card. M16ACFG.EXE should be loaded before the
AUTODRV.SYS line. The AUTODRV.INI file should be edited
to read as follows:
[ETHERNET]
CARDID=ETHER,CREDI
;OPTION=IGNORE (The semicolon is required)
PORT1=320, IRQ=5, MEMORY1=C800, WAITSTATE=1
The same resources should be specified in the PRO/100 PC Card
driver initialization file.
E If M16ACFG.EXE returns the error message "Exclusive use
Troubleshooting
99